2008 Honda Accord
Mileage
103,290
Service Date
10/7/2021
Services Performed
- COMPUTER SYSTEMS CHECK Document diagnostic trouble codes (DTC) Monitor computer functions & review freeze frame data when applicable. Perform visual / minor inspection of related components. Research for related Repair Track Bulletins.
- REMOVE VALVE FOR TESTING. RESISTANCE OK. 8 OHMS. VALVE MOVING, OK. CLEAN AND REINSTALL. DURING TEST DRIVE, LIGHT CAME BACK ON, RECHECK RESISTANCE AND FOUND IT TO BE AROUND 33 OHMS. NEEDS NEW SOLENOID. * INSTALL NEW VTC ADVANCE SOLENOID. CLEAR CODE AND TEST DRIVE VEH, OK. * DURING FIRST START IN MORNING, TIMING CHAIN MADE SOME NOISES THEN WENT AWAY. RECOMMEND AN OIL AND FILTER CHANGE. * VEH ALSO NEEDS AN AIR INTAKE TUBE, TUBE HAS SPLITS AROUND TUBE, AIR LEAKS WILL AFFECT FUEL AIR MIXTURE AND ALLOW DIRT TO GET TO THROTTLE PLATE AND BORE ASSEMBLY. NEEDS NEW TUBE AND AN EMISSION SYSTEMS SERVICE. **********************
- Clean battery connections. Fill & charge as required. perform load or impedance tests. ***************
- CLEAN THROTTLE PLATE AND BORE AS NECC. CLEAN MASS AIR FLOW SENSOR. REPLACE AIR FILTER . INSTALL NEW AIR TUBE. ADD FUEL SYSTEM CLEANER TO FUEL TANK. CHECK FOR VACUUM LEAKS. ***************
- Drain & fill oil, Install new oil filter. Lubricate chassis, latches & hinges. Inspect fluid levels (when access time permits) Set tire pressure to specs. ******************
- ************************
- REMOVE FILTER FOR INSP. LOTS OF POLLEN AND DEBRIS. VACUUM AS NECC, INSTALL NEW CABIN AIR FILTER. ***********************
- REPLACE SERPENTINE DRIVE BELT. ****************************
- REPLACE HOOD ROD PIVOT GROMMET, LUBE AS NECC. *******************
DAN M. gave our service a 5 star review on 10/7/2021
