2014 Honda CR-V
Mileage
113,040
Service Date
4/7/2022
Services Performed
- MAINTENANCE INSPECTION – **************
- ***************
- Drain & fill oil, Install new oil filter. Lubricate chassis, latches & hinges. Inspect fluid levels (when access time permits) Set tire pressure to specs. ******************
- ************************
- CHECK PCV OPER, CHECK FOR VACUUM ON BREATHER TUBE, VAC FELT, PCV OK. CLEAN THROTTLE PLATE AND BORE AS NECC. CLEAN MASS AIR FLOW SENSOR. REPLACE AIR FILTER IF REQUIRED, FILTER, OK. CHECK FOR VACUUM LEAKS. ADD FUEL SYSTEM/ CARBON CLEANER TO FUEL TANK. ***************
- Remove wheels from vehicle. Inspect brakes. Computer spin balance. Reinstall wheels to vehicle and torque lug nuts to manufacturer's specifications. Includes rotation. *****************
- Install new brake pads, inspect calipers & rotors. Clean & lubricate slide surfaces. Bleed hydraulic system & road test vehicle. **********************
- REPLACE REAR CALIPERS. LUBE AND BLEED AS NECC. *************************************
- Clean, inspect, lubricate & adjust ***************
- AUTOMATIC TRANSMISSION FLUID – Drain & Refill – [Includes: Additional time for use of scan tool to perform this procedure.]
- DIFFERENTIAL FLUID – Drain & Refill – AWD – [Includes: Additional time for use of scan tool to perform this procedure.]
- Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check alignment of all four wheels. Adjust caster, camber, toe-in, Center steering wheel. Perform steering angle relearn as required. ******************** Factory adjustments are not always provided. Additional parts and labor may be required. ********************
ROBERT C. gave our service a 5 star review on 4/9/2022
