INSPECTION FAILURE When your vehicle fails inspection you are entitled one retest within 60 days at the original inspection station. Safety defects should be repaired immediately to avoid defective equipment citation.
JOANNE G. gave our service a 5 star review on 3/19/2023
Drain & fill oil, Install new oil filter. Lubricate chassis, latches & hinges. Inspect fluid levels (when access time permits) Set tire pressure to specs. ******************
************************
MOUNT AND BALANCE FOUR NEW TIRES SERVICE TPMS OR VALVE STEM
Tire Discard (4)
DTC P054A COLD START CAMSHAFT POSITION TIMING THIS CODE CAN BE CAUSED BY POOR OIL CONDITION AFTER THE OIL CHANGE THE VEHICLE WAS STATED SEVERAL TIMES AND TEST DRIVEN – SCAN TOOL DATA LOOKED NORMAL. ********************** FURTHER CHECK ENGINE LIGHT TROUBLE WILL REQUIRE MORE TESTING.
ROBERT J. gave our service a 5 star review on 3/12/2023
Remove and reinstall four wheels to inspect brake condition. Inspect entire system for leaks. Lining remaining is: Front (25%) Rear (0%) *****************
Install new brake pads. Inspect calpers & rotors. Clean & lube slide points Bleed hydraulic system & Road test vehicle. *******************
TONY S. gave our service a 5 star review on 2/7/2023